Ground screws are used to provide the electrical and safe pathway to the ground and helps to prevent shock. They have a finishing of green dye and threaded into the box and fastens the ground conductor. They are available in a wide range of diameters and lengths. Therefore, no problem will be faced while choosing the perfect one according to the requirements of the project. They bear the desired capacity of loads for the several conditions of ground that suits your project. These are the innovative foundations that are screwed into the ground into the depths. They fulfils the need if bypass for the traditional foundations including concrete and others. They are screwed up to 1.2m and 5.0m. The loads are transferred to the deep layers of soul and the rocks and these screws provide the capacity that bears the heavy loads by end-bearing, friction or by using both. There is no need for digging foundations by using them.
The use of digging screws provides several benefits that include;
- Their instalment is about 70% faster than other screws
- These are the perfect solution for the projects about uneven ground, hard reaching areas and for sloping as well.
- Any building, house, etc. can be easily build on them with no damage or problem.
- There is no particular weather or time or month of the year is required to install them. The rain or first cannot delay their installation which is best thing about them.
- The concrete-based foundation are not far better for the surrounding and environment, but these screens provides no harm to the surrounding and also their best quality I that they are easy to afford.
- There is no requirement to dig and excavate if you use them for the project.
- These screws make are that there will be no damage or mess to the place of the project or their surrounding area.
The instalment of the screws is done by following some steps in a proper manner to make sure there will be no damage to the site and everything will be done properly. The whole place or ground is scanned if there is any problem to resolve before the installation of screws. The ground is measured by any the footprint of the ground. By using the professional lasers, the stream lines are marked out in order to make sure every need thing is present in proper condition and in required level. The screws are drilled into ground by using best quality screw drives by the experienced installers. The project will now begin without causing any damage to the area of project and its surrounding. The above steps at performed by the experienced and supervise people because needs to be perfect to receive the desired results as a huge amount of money is used for the probes therefore no one can afford the loss by improper installation.If you require any further information please visit our website foundationsolutionsaustralia.com.au.